1. Do not use wax to coat the line. Waxing will greatly reduce the overall tension of the racket frame. When hitting the ball, it is easy to slip the line, which can cause unstable ball control and deviation of the hitting point. In addition, waxing poses great harm to the wire drawing machine, as the wire clamp cannot hold the wire and runs, the wire clamp at the machine head will slide, and the wire clamp seat will slide smoothly from side to side.
2. Do not use the machine head to tie knots. You can use pointed pliers, knotting pliers, and wire blocking clamps to tie knots. Using the machine head to tie knots can cause the knotting line to drive the vertical line to form a reverse force, which can easily cause wire breakage or even beat breakage.
3. When the horizontal line passes through the common hole of the horizontal and vertical lines, it will be difficult to pass through. You can use pointed pliers to clamp the line head and pass through. If using an awl to expand the hole, you should be particularly careful when the awl breaks the line.
Manager Zhou
zhougb@qtour-cn.com
No. 36 Qihuang Road, Qingyang Industrial Park, Sihong County, Jiangsu Province